SIMPLE TO INSTALL ELCI DEVICE MAKES BOATING SAFER

 Stray AC current leaking into the water from faulty marina or boat wiring can be lethal if someone falls in from a dock or deck. Avoiding such a tragedy is simple with the addition of a SmartPlug ELCI (equipment leakage circuit interrupter). Similar to a residential ground fault circuit interrupter, it instantly trips the breaker if a problem is detected to stop all electrical flow.

A two-piece system, the SmartPlug ELCI Kit is comprised of a sensor and a 30A or 50A Breaker. The combination meets ABYC E-11 standards for ground fault protection and shore power circuit interruption. Both units have a UV-resistant enclosure housed in SmartPlug’s uniquely-designed but standard-size stainless steel or white non-metallic inlet.

Completely automatic upon power-up, the SmartPlug ELCI element is UL-943 listed, has power and fault status indicators, and test and reset buttons. The rocker switch breaker is UL-489 listed with a trip level of <30mA (27mA nominal) at a trip time of <100mS (60mS nominal). Running on 120V AC or 120/240V AC, 50/60 Hz, it’s rated to operate between -31° and 150° F.

Installation of the system is simple with common household tools. The combination accommodates up to three wires, 6 AWG, with no twisting required.

FOR MORE INFORMATION CONTACT:

SmartPlug Systems

2500 Westlake Ave N., Ste. G,

Seattle, WA 98109-2262.

206-285-2990

Fax: 206-285-2981.

Info@smartplug.com

www.smartplug.com

More Info :  ELCI DEVICE MAKES BOATING

Comments

Popular posts from this blog

50A SmartPlug Female Connector to 50A Male 4ft Twist-type Connector | 50 amp rv power cord

Top Florida Fishing Destinations

The Dangers of Using Outdated Shore Power Systems